08 Dodge Ram 2500 Power Wagon 4WD 4 Inch Lift Kit - Nitro Shocks

Build your 2008 Dodge Ram 2500 Power Wagon the right way with the Zone Offroad 4 Inch Lift Kit. This complete system is engineered to add ground clearance and room for larger tires while keeping the install bolt-on friendly.

The front uses a coil spring design to deliver a 4-inch lift, and out back the block setup adds 4 inches. The kit comes with Zone Nitro Series shocks matched to the new ride height. It is designed to clear tires up to 37 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderate and takes about 7 hrs. Confirm fitment for your 2008 Dodge Ram 2500 Power Wagon using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• 100% bolt-on design for easy installation.
• High-strength control arm relocation brackets correct suspension geometry and add rigidity.

Kit Components:

• ZON7750 (x2) - Nitro- 27.40 x 16.20 x 2-3/8 - S50/EB2
• ZON7761 (x2) - Nitro- 33.00 x 19.25 x 2-3/8 - EB1/EB1
• ZOND1419 - 03-12 Dodge 2500 4 Inch Block Kit-3.5 Inch Axle
• ZOND1801 - 03-13 Dodge 2500 Control Arm Mount Kit
• ZOND1803 - 08 Dodge 2500 6 Inch/8 Inch Front Box Kit
• ZOND3601 - Coil Spring Box Kit: 03-12 Dodge Ram 2500 - Gas - 6 Inch Front Coil Springs
• ZOND5301 - Dodge PowerWagon Sway Bar Links

Important Notes:

• If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need ZOND8404 also with your kit.
• This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
• Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
• This kit is not designed for dually models, but may be easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.

Details:

• Fits: 2008 Dodge Ram 2500 Power Wagon
• Location: Front/Rear
• Lift Height: 4 Inch
• Rear Lift Height: 4 Inch
• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Max Tire Size: 37 x 12.5
• Shocks Included: Yes
• Shock Style: Nitro Series
• Drive: 4WD
• Installation Time: 7 hrs
• Installation Difficulty: Moderate
• Brand: Zone Offroad
• Part Number: ZOND133N
• Weight: 203.4 lb

Product Video: Watch the Zone Offroad video on YouTube

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov