09-13 Dodge Ram 2500/3500 4WD, Gas 6 Inch Lift Kit - 4 Inch Axle, Nitro Shocks

Raise your 2009-2013 Dodge Ram 2500/3500 with the Zone Offroad 6 Inch Lift Kit. It adds ground clearance, tire clearance and a more aggressive stance so your truck is ready for the trail and still looks right on the street.

The front uses a coil spring design to deliver a 6-inch lift, and out back the block setup adds 4 inches. The kit comes with Zone Nitro Series shocks matched to the new ride height. It is designed to clear tires up to 37 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderate and takes about 7 hrs. Proudly made in the USA. Confirm fitment for your 2009-2013 Dodge Ram 2500/3500 using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• 100% bolt-on design for easy installation.
• High-strength control arm relocation brackets correct suspension geometry and add rigidity.

Kit Components:

• ZON7750 (x2) - Nitro- 27.40 x 16.20 x 2-3/8 - S50/EB2
• ZON7761 (x2) - Nitro- 33.00 x 19.25 x 2-3/8 - EB1/EB1
• ZOND1418 - 03-12 Dodge 2500 4 Inch Block Kit-4 Inch Axle
• ZOND1801 - 03-13 Dodge 2500 Control Arm Mount Kit
• ZOND1802 - 09-13 Dodge 2500 6 Inch/8 Inch Front Box Kit
• ZOND3601 - Coil Spring Box Kit: 03-12 Dodge Ram 2500 - Gas - 6 Inch Front Coil Springs

Important Notes:

• Will work with Power Wagon models with the addition of sway bar link kit D5301.
• Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 4" over stock.
• This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
• Although rare, if you experience front drive-line vibration, install the optional transfer case indexing ring.
• This kit is not designed for dually models, but may be easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
• Works on 2013 2500 with 4 link front suspension only.
• Will not fit 1 Ton Trucks.

Details:

• Fits: 2009-2013 Dodge Ram 2500/3500
• Location: Front/Rear
• Lift Height: 6 Inch
• Rear Lift Height: 4 Inch
• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Max Tire Size: 37 x 12.5
• Shocks Included: Yes
• Shock Style: Nitro Series
• Drive: 4WD
• Installation Time: 7 hrs
• Installation Difficulty: Moderate
• Country Of Origin: United States
• Brand: Zone Offroad
• Part Number: ZOND38N
• Weight: 195.5 lb

Product Video: Watch the Zone Offroad video on YouTube

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov