10-13 Dodge Ram 2500/3500 4WD 5 Inch Lift Kit - 3-1/2 Inch Axle, Nitro Shocks

Ready to get more out of your 2010-2013 Dodge Ram 2500/3500? The Zone Offroad 5 Inch Lift Kit gives you the lift, the clearance and the look in one vehicle-specific kit.

The front uses a coil spring design to deliver a 5-inch lift, and out back the block setup adds 3 inches. The kit comes with Zone Nitro Series shocks matched to the new ride height. It is designed to clear tires up to 35 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderately easy and takes about 6 hrs. Proudly made in the USA. Confirm fitment for your 2010-2013 Dodge Ram 2500/3500 using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• 100% bolt-on design for easy installation.
• Bump stop extensions properly limit up-travel, protecting your vehicle.
• Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
• Heavy-duty front track bar bracket correctly positions front axle under vehicle.
• Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.

Kit Components:

• ZON7750 (x2) - Nitro- 27.40 x 16.20 x 2-3/8 - S50/EB2
• ZON7761 (x2) - Nitro- 33.00 x 19.25 x 2-3/8 - EB1/EB1
• ZOND1409 - 03-13 Ram 2500/03-12 Ram 3500 Rear Box Kit
• ZOND1504 - 10 Dodge Ram 2500/3500 5 Inch Box Kit
• ZOND3501 - Coil Spring Box Kit: 03-13 Dodge 2500/3500- 5 Inch Front Coil Springs

Important Notes:

• Will work with Power Wagon models with the addition of sway bar link kit D5301.
• Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 3" over stock.
• This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
• Factory wheels fit when paired with factory / original equipment tire size.
• This kit is not designed for dually models, but may be easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
• These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
• This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift drive-line angles and avoid / eliminate driveshaft vibration.

Details:

• Fits: 2010-2013 Dodge Ram 2500/3500
• Location: Front/Rear
• Lift Height: 5 Inch
• Rear Lift Height: 3 Inch
• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Max Tire Size: 35 x 12.5
• Shocks Included: Yes
• Shock Style: Nitro Series
• Drive: 4WD
• Installation Time: 6 hrs
• Installation Difficulty: Moderately Easy
• Country Of Origin: United States
• Brand: Zone Offroad
• Part Number: ZOND16N
• Weight: 169.8 lb

Product Video: Watch the Zone Offroad video on YouTube

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov