13-18 Ram 3500 4WD, Diesel 4.5 Inch Lift Kit - 2 Inch Block Kit, Nitro Shocks

Build your 2013-2018 Ram 3500 the right way with the Zone Offroad 4.5 Inch Lift Kit. This complete system is engineered to add ground clearance and room for larger tires while keeping the install bolt-on friendly.

The front uses a coil spring & drop bracket design to deliver a 4.5-inch lift, and out back the block setup adds 2 inches. The kit comes with Zone Nitro Series shocks matched to the new ride height. It is designed to clear tires up to 37 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderate and takes about 5 hrs. Confirm fitment for your 2013-2018 Ram 3500 using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• Corrects suspension, steering, and drive-line geometry for great on-road handling and improved off-road performance.
• Full length replacement coil springs add additional ride height while maintaining ride quality.
• High-strength control arm relocation brackets correct suspension geometry and add rigidity.

Kit Components:

• ZON7742 (x2) - Nitro- 27.40 x 16.20 x 2-3/8 - S50/EB2
• ZON7759 (x2) - Nitro - 29.80 x 17.60 x 2-3/8 - EB1/EB1
• ZOND1207 - 13-18 Ram 3500 2 Inch Rear Block Kit, 4 Inch U-bolts
• ZOND1401 - 14-18 Ram 2500/13-18 Ram 3500 4 Inch/4.5 Inch Radius Arm Drop Front Box Kit
• ZOND3401 - Coil Spring Box Kit: 14-27 Ram 2500/13-27 Ram 3500 - 4.5 Inch Diesel - 5.5 Inch Gas - Driver Side - Front Coil Spring - Single Spring
• ZOND3402 - Coil Spring Box Kit: 14-18 Ram 2500/13 Ram 3500 - 4.5 Inch Diesel – 5.5” Gas – Pass Side - Front Coil Spring - Single Spring

Important Notes:

• Fits trucks equipped with the 6.4L gas engines.
• Front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
• Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
• Does NOT work for models with factory rear airbag suspension.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• 6.4L Gas models will require exhaust modification to clear the front driveshaft. 5.7L Gas models may require modification.
• Factory wheels fit when paired with factory / original equipment tire size.
• This kit is not designed for dually models, but may be easily adapted to accommodate your truck.

Details:

• Fits: 2013-2018 Ram 3500
• Location: Front/Rear
• Lift Height: 4.5 Inch
• Rear Lift Height: 2 Inch
• Front Lift Method: Coil Spring & Drop Bracket
• Rear Lift Method: Block
• Max Tire Size: 37 x 12.5
• Shocks Included: Yes
• Shock Style: Nitro Series
• Drive: 4WD
• Installation Time: 5 hrs
• Installation Difficulty: Moderate
• Brand: Zone Offroad
• Part Number: ZOND135N
• Weight: 164.8 lb

Product Video: Watch the Zone Offroad video on YouTube

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov