13-18 Ram 3500 4WD, Diesel 4.5 Inch Lift Kit w/ Radius Arm - 2 Inch Block Kit, FOX 2.0 Adventure Shocks

Ready to get more out of your 2013-2018 Ram 3500? The Zone Offroad 4.5 Inch Lift Kit w/ Radius Arm gives you the lift, the clearance and the look in one vehicle-specific kit.

The front uses a coil spring & radius arm design to deliver a 4.5-inch lift, and out back the coil spring setup adds 2 inches. The kit comes with FOX 2.0 Adventure Series shocks matched to the new ride height. It is designed to clear tires up to 35 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderate and takes about 6 hrs. Confirm fitment for your 2013-2018 Ram 3500 using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• Progressive rate front coil springs improve ride quality and off-road performance.
• HD radius arm to correct caster while maximizing ground clearance.
• Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle.
• Bump stop relocation, sway bar relocation and brake line relocation to maintain factory-like operating angles.
• Replacement rear lift blocks and u-bolts to lift and level the stance.

Kit Components:

• FOX98450742 (x2) - FOX Adventure Shock 28.24 x 17.15 x 2-S50/EB1
• FOX98450759 (x2) - FOX Adventure Shock 30.05 x 18.46 x 2-EB1/EB1
• ZOND1207 - 13-18 Ram 3500 2 Inch Rear Block Kit, 4 Inch U-bolts
• ZOND1402 - 14-18 Ram 2500/13-18 Ram 3500 4 Inch/4.5 Inch Radius Arm Front Box Kit
• ZOND1413 (x2) - 14-27 Ram 2500/13-27 Ram 3500 Replacement Radius Arm Box Kit - Zone
• ZOND3401 - Coil Spring Box Kit: 14-27 Ram 2500/13-27 Ram 3500 - 4.5 Inch Diesel - 5.5 Inch Gas - Driver Side - Front Coil Spring - Single Spring
• ZOND3402 - Coil Spring Box Kit: 14-18 Ram 2500/13 Ram 3500 - 4.5 Inch Diesel – 5.5” Gas – Pass Side - Front Coil Spring - Single Spring

Important Notes:

• Although very rare, front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
• Optional t-case indexing ring kit recommended to reduce front driveline angle.
• Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813. Fitment:.
• Does NOT work for models with factory rear airbag suspension.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Details:

• Fits: 2013-2018 Ram 3500
• Location: Front/Rear
• Lift Height: 4.5 Inch
• Rear Lift Height: 2 Inch
• Front Lift Method: Coil Spring & Radius Arm
• Rear Lift Method: Coil Spring
• Max Tire Size: 35 x 12.5
• Shocks Included: Yes
• Shock Style: FOX 2.0 Adventure Series
• Drive: 4WD
• Installation Time: 6 hrs
• Installation Difficulty: Moderate
• Brand: Zone Offroad
• Part Number: ZOND136F
• Weight: 194.9 lb

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov