13-18 Ram 3500 4WD, Diesel 6.5 Inch Lift Kit - FOX 2.0 Adventure Shocks

Build your 2013-2018 Ram 3500 the right way with the Zone Offroad 6.5 Inch Lift Kit. This complete system is engineered to add ground clearance and room for larger tires while keeping the install bolt-on friendly.

The front uses a coil spring & drop bracket design to deliver a 6.5-inch lift, and out back the coil spring setup adds 5 inches. The kit comes with FOX 2.0 Adventure Series shocks matched to the new ride height. It is designed to clear tires up to 35 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderate and takes about 5 hrs. Confirm fitment for your 2013-2018 Ram 3500 using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• Progressive rate front coil springs improve ride quality and offroad performance.
• Radius arm drop brackets to correct caster and improve suspension geometry.
• Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle.
• Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles.
• Replacement rear lift blocks and u-bolts to lift and level the stance.

Kit Components:

• FOX98450742 (x2) - FOX Adventure Shock 28.24 x 17.15 x 2-S50/EB1
• FOX98450761 (x2) - FOX Adventure Shock 33.85 x 20.76 x 2-EB1/EB1
• ZOND1508 - 03-13 Dodge 2500 5 Inch Block Kit-4 Inch Axle
• ZOND1601 - 14-18 Ram 2500/13-18 Ram 3500 5.5 Inch/6.5 Inch Radius Arm Drop Front Box Kit
• ZOND3602 (x2) - Coil Spring Box Kit: 14-24 Ram 2500/13-24 Ram 3500 - Diesel - 6.5 Inch Front Coil Spring - Single Coil

Important Notes:

• Fits trucks equipped with the 6.4L gas engines.
• Front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
• Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
• Does NOT work for models with factory rear airbag suspension.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• 6.4L Gas models will require exhaust modification to clear the front driveshaft. 5.7L Gas models may require modification.
• Factory wheels fit when paired with factory / original equipment tire size.

Details:

• Fits: 2013-2018 Ram 3500
• Location: Front/Rear
• Lift Height: 6.5 Inch
• Rear Lift Height: 5 Inch
• Front Lift Method: Coil Spring & Drop Bracket
• Rear Lift Method: Coil Spring
• Max Tire Size: 35 x 12.5
• Shocks Included: Yes
• Shock Style: FOX 2.0 Adventure Series
• Drive: 4WD
• Installation Time: 5 hrs
• Installation Difficulty: Moderate
• Brand: Zone Offroad
• Part Number: ZOND52F
• Weight: 215.4 lb

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov