13-18 Ram 3500 4WD, Diesel 6.5 Inch Lift Kit w/ Radius Arm - Nitro Shocks

Raise your 2013-2018 Ram 3500 with the Zone Offroad 6.5 Inch Lift Kit w/ Radius Arm. It adds ground clearance, tire clearance and a more aggressive stance so your truck is ready for the trail and still looks right on the street.

The front uses a coil spring & drop bracket design to deliver a 6.5-inch lift, and out back the coil spring setup adds 5 inches. The kit comes with Zone Nitro Series shocks matched to the new ride height. It is designed to clear tires up to 35 x 12.5 (trimming may be required on some applications).

Installation is typically rated moderate and takes about 6 hrs. Proudly made in the USA. Confirm fitment for your 2013-2018 Ram 3500 using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• Progressive rate front coil springs improve ride quality and -performance.
• HD radius arm to correct caster while maximizing ground clearance.
• Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle.
• Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles.
• Replacement rear lift blocks and u-bolts to lift and level the stance.

Kit Components:

• ZON7742 (x2) - Nitro- 27.40 x 16.20 x 2-3/8 - S50/EB2
• ZON7761 (x2) - Nitro- 33.00 x 19.25 x 2-3/8 - EB1/EB1
• ZOND1413 (x2) - 14-27 Ram 2500/13-27 Ram 3500 Replacement Radius Arm Box Kit - Zone
• ZOND1508 - 03-13 Dodge 2500 5 Inch Block Kit-4 Inch Axle
• ZOND1602 - 14-18 Ram 2500/13-18 Ram 3500 5.5 Inch/6.5 Inch Radius Arm Front Box Kit
• ZOND3602 (x2) - Coil Spring Box Kit: 14-24 Ram 2500/13-24 Ram 3500 - Diesel - 6.5 Inch Front Coil Spring - Single Coil

Important Notes:

• Front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
• Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
• Does NOT work for models with factory rear airbag suspension.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Details:

• Fits: 2013-2018 Ram 3500
• Location: Front/Rear
• Lift Height: 6.5 Inch
• Rear Lift Height: 5 Inch
• Front Lift Method: Coil Spring & Drop Bracket
• Rear Lift Method: Coil Spring
• Max Tire Size: 35 x 12.5
• Shocks Included: Yes
• Shock Style: Nitro Series
• Drive: 4WD
• Installation Time: 6 hrs
• Installation Difficulty: Moderate
• Country Of Origin: United States
• Brand: Zone Offroad
• Part Number: ZOND57N
• Weight: 238.8 lb

Product Video: Watch the Zone Offroad video on YouTube

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov