21-26 Ford F-150 with CCD 6 Inch Lift Kit

Build your 2021-2026 Ford F-150 with CCD the right way with the Zone Offroad 6 Inch Lift Kit. This complete system is engineered to add ground clearance and room for larger tires while keeping the install bolt-on friendly.

The front uses a strut spacer design to deliver a 6-inch lift, and out back the block setup adds 4 inches. It is designed to clear tires up to 37 x 12.5 (trimming may be required on some applications).

Installation is typically rated difficult and takes about 8-10 hrs. Zone Offroad backs it with a limited lifetime warranty. Confirm fitment for your 2021-2026 Ford F-150 with CCD using the Details below, or contact us if you need help matching the right kit to your truck.

Features and Benefits:

• Works with models equipped with CCD (Continuous Controlled Damping) suspension.
• Kit design optimizes ground clearance and improves offroad protection.
• Maintains drivability and handling by correcting suspension, steering and driveline geometry.
• Redesigned steering knuckles specific to the 2021-2026 F150 to maintain ESC system compliance.
• Kit includes Factory Protection Plus (ESC system compatibility,.
• Limited lifetime warranty, 5yr-60k mile drivetrain warranty).
• Kit allows clearance for 35" tires.
• Functions with Blue Cruise.

Kit Components:

• ZONF2605 - 21-26 Ford F150 4WD, CCD Only, 6 Inch Strut Spacer Box Kit
• ZONF2638 - 21-26 Ford F150 4WD, 5 Inch Rear Box Kit
• ZONF2660 - 21-26 Ford F150 4WD, Knuckle Box Kit - Driver
• ZONF2661 - 21-26 Ford F150 4WD, Knuckle Box Kit - Passenger
• ZONF2662 - 21-26 Ford F150 4WD, Front Box Kit
• ZONF2663 - 21-26 Ford F150 4WD, Front Box Kit

Important Notes:

• Will not work with an aftermarket Upper Control Arm kits.
• 18"" or larger diameter wheels required. Stock 17"" and 18"" wheels cannot be re-installed.
• Stock 20"" wheels can be used with up to a 305/60R20 tire. 18"" wheels with 5-5.5"" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5.5"" backspacing is highly recommended for tire to frame crash bar clearance.
• Block kits replace factory 1-1/4"" block. Stock block will not be reinstalled.
• Crash bars may require modification based on wheel and tire choice. It is the end users responsibility to ensure modifications are non-detrimental to vehicle safety.
• Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, we recommends to have this performed prior to installing the lift.
• Does NOT fit diesel models. Will not work with Tremor models.
• Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.

Details:

• Fits: 2021-2026 Ford F-150 with CCD
• Location: Front/Rear
• Lift Height: 6 Inch
• Rear Lift Height: 4 Inch
• Front Lift Method: Strut Spacer
• Rear Lift Method: Block
• Max Tire Size: 37 x 12.5
• Shocks Included: No
• Drive: 4WD/RWD
• Installation Time: 8-10 hrs
• Installation Difficulty: Difficult
• Warranty: Limited Lifetime Warranty
• Brand: Zone Offroad
• Part Number: ZONF103
• Weight: 219.2 lb

Product Video: Watch the Zone Offroad video on YouTube

Installation Instructions: Download the Zone Offroad installation guide (PDF)

California Proposition 65 warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov